They are passive air/water chillers (without cooling system and refrigerant) for cooling process fluids. The cooling takes place purely by temperature difference between medium and ambient temperature.
ATC is the UK’s leading manufacturer of recirculating chillers and temperature control products. From standard products to fully customized systems, ATC can offer you the best cooling solution and temperature control for your problems.
What makes the device special:
- Cost-effective operation
- Can also be used in combination with other coolers. Example: one or more active coolers as an indoor water/water option and an Airblast cooler outdoor. As a result, the heat is efficiently dissipated directly into the outdoor area without burdening the air conditioning system. Furthermore, the noise pollution in the interior is reduced, since no evaporator fan is required indoor.
Use for cooling / temperature control of:
- Inverter
- Welding torches
- Hydrogen electrolysis
- Uniaxial press machinery
- Stamping machines
- Cooling electronics
- Material testing
- Devices for cancer therapy
- Climate chambers
- RF generation
- Testing of engines
- Roots blowers
- Cooling of furnaces
- Asphalt screening
- Large motors for mixing plants
Relevant performance specifications
| A01 | A03 | |
| Cooling capacity1 | 1.000 Watt | 3.000 Watt |
| Max. temperature return line (standard) | + 60 °C | + 60 °C |
| Max. temperature return line (option) | + 85 °C | + 85 °C |
| Temperatur stability at constant load | currently unknown | +/- 0.5 °C |
| Principle | passive air / water chiller only indoor installation | passive air / water chiller indoor and outdoor installation possible |
| Pump options and flow rates at 6 bar back pressure | PC3 – 1.3 l/min PC6 – flowrate currently unkown | P5 – 5 l/min P10 – 10 l/min P17 – 17 l/min |
| System volume | 1 l | 5 l |
| Compatibility | Hexid, Propylene-Glycol, water | Hexid, Propylene-Glycol, water |
| Operating pressure range 2 | currently unkown | up to 10 bar |
1 At ambient temperature 10 °C higher than the return temperature of the Airblast Cooler and additional 10 °C heating by the application to be cooled
2 Specified presure ranges only applies to PD pumps and not to centrifugal pumps
Other relevant specifications
| | A01 | A03 |
| Weight | 10 kg | 65 kg |
| Size (L x W x H) | 435 x 180 x 380 mm | 540 x 550 x 713 mm |
| Noise level | 54 dB (A) 1 m | 65 dB (A) 1 m |
| Operating voltage and maximum power requirement / for 50 Hz | 230 V – 1 A | 230 V – 4 A |
| Environmental temperature | bis + 40 °C | bis + 50 °C |
| Min. inside diameter of pipeline | 12 mm | 12 mm |
Manuals for download:
Brochures and other information for download:
Inquiries regarding offer and advice please contact office@labsupport.at